Skip to content

Dasharo Compatibility: UEFI Shell

Test cases

USH001.001 UEFI Shell

Test description

This test aims to verify that the DUT has the ability to boot into an integrated UEFI Shell application.

Test configuration data

  1. FIRMWARE = coreboot
  2. BOOT_MENU_KEY = F7

Test setup

  1. Proceed with the Generic test setup: Firmware

Test steps

  1. Power on the DUT
  2. While the DUT is booting, hold the BOOT_MENU_KEY to enter the UEFI Boot Menu
  3. Select the UEFI Shell option using the arrow keys and press Enter

Expected result

The DUT boots into an UEFI Shell successfully, as indicated by the example console output shown on the screen:

UEFI Interactive Shell v2.2
EDK II
UEFI v2.70 (EDK II, 0x00010000)
Mapping table
      FS0: Alias(s):HD1b:;BLK2:
      PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,9C-BB-50-01-BB-38-25-5
-4BB4-4FDD-9534-B097CD497222,0x800,0x100000)
      FS1: Alias(s):HD1c:;BLK3:
      PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,9C-BB-50-01-BB-38-25-1
-C6AB-4400-AE03-0BF2960DD525,0x100800,0x1D0C5000)
     BLK1: Alias(s):
      PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,9C-BB-50-01-BB-38-25-)
     BLK0: Alias(s):
      PciRoot(0x0)/Pci(0x14,0x0)/USB(0x0,0x2)
Press ESC in 1 seconds to skip startup.nsh or any other key to continue.
Shell>