Skip to content

Dasharo Compatibility: Custom boot menu key

Test cases

CBK001.001 Custom boot menu key

Test description

This test aims to verify that the DUT is configured to use custom boot menu and setup menu hotkeys (same hotkeys as in the vendor firmware).

Test configuration data

  1. FIRMWARE = coreboot
  2. BIOS_SETUP_KEY = F2
  3. BOOT_MENU_KEY = F7

Test setup

  1. Proceed with the Generic test setup: firmware

Test steps

  1. Power on the DUT and hold the BIOS_SETUP_KEY to enter the UEFI Setup Menu
  2. Once the DUT has booted into the setup menu, power it off using the power button
  3. Power on the DUT again and hold the BOOT_MENU_KEY to enter the UEFI Boot Menu

Expected result

The DUT boots into an UEFI Setup menu and Boot menu using the specified hotkeys.