Skip to content

Dasharo Compatibility: Memory HCL

Test cases

HCL001.001 Memory HCL - boot into OS (Ubuntu 20.04)

Test description

This test aims to verify that the DUT can boot with the memory module combinations specified in the HCL

Test configuration data

  1. FIRMWARE = coreboot
  2. BIOS_SETUP_KEY = F2
  3. OPERATING_SYSTEM = Ubuntu 20.04

Test setup

  1. Prepare the memory modules specified in the HCL
  2. Connect to the UART debug interface and open a serial console (optional)
  3. Proceed with the Generic test setup: Firmware
  4. Proceed with the Generic test setup: OS installer
  5. Proceed with the Generic test setup: OS installation
  6. Proceed with the Generic test setup: OS boot from disk

Test steps

  1. Insert memory to DUT's memory port, starting with the first position from the HCL
  2. Proceed with the Generic test setup: OS boot from disk
  3. Power OFF DUT
  4. Repeat the test steps for all positions in the HCL

Expected result

  1. The expected result is that the OS boots successfully with all memory combinations specified in the HCL
  2. If the OPERATING_SYSTEM boots, note the success and power the DUT OFF
  3. If the OPERATING_SYSTEM doesn't boot, check the logs (optional - if connected over serial console) for the FSP Memory Init has returned an error and note the failure